D01-501152-01 Rev A
SXGA096 Design Reference Board User
’
s Manual
4
Figure 4-2 Display Carrier Board Connection Orientation
Lift the display by its sides and take care not to press on the glass lid or leave fingerprint
marks on it. Insert the display into the Design Reference Board.
Setup PC for Proper Video Output
The default compatible resolution is SXGA (1280x1024) with a refresh rate of
60 Hz. If you are using this input set the video resolution for 1280x1024 in
your PC’s display properties.
Ensure that the refresh rate to set to 60 Hz, or other supported refresh rate per
the display specification.
If you are using a laptop PC, you may need to export the video signal to an
external monitor. This is usually accomplished through a key press including
the Fn key + a designated function key. See your PC’s operation instructions
for more information.
Power Up
Set the power switch to the ON position.
