EMAG Emmi 20 HC Скачать руководство пользователя страница 3

 

3  Important notes 

The ultrasonic cleaner must only be operated with the main source voltage printed on 
the nameplate (rear of the casing). ( In earthed socket outlet.)  

• Do not fill flammable chemical agents directly into the tank.  

• Do not put your hands into the cleaning liquid during the process of ultrasonic 
cleaning.  

• In the case of transport damages do not connect unit to power system.  

• Do not use ultrasonic cleaner to clean animals or part of the human body 
(fingernails etc.)  

• Do not remain in the immediate vicinity (1 m) for longer than 4 hours.  

• If objects are heavily soiled, place them soiled side down into the liquid and do not 
stack them.  

• The ultrasonic cleaner only must be operated with a sufficient amount of cleaner 
(

approximately three-quarter filling of the tank, i.e. approximately 1-2 cm 

measured from the upper rim of the tank). 

It is absolutely normal that the upper 

rims of the tank warm up after a longer period of operation.  

  

4 Operating Instruction  

 
Fill tank with 

Flexonal

® 

WBC 35 PU-Löser 

and plug mains plug into socket. By 

pressing of the mains switch the cleaning time is set; the temperature is adjusted with 
the help of the turning knob. Setting on continuous operation also is possible 
(counter-clockwise rotation). For reasons of safety, however, we do not recommend 
such procedure. The unit may run dry due to evaporation and thus get damaged.  
The cleaning time to be set depends on the degree of soiling of the objects you want 
to clean. If the pre-set cleaning cycle has been finished, the unit automatically 
terminates the cleaning process. Another turning of turning knobs will put the unit 
back into operation.  
After the termination of the cleaning process remove the objects from the tank and 
rinse them shortly with water in order to remove remaining particles of dirt  
After one or several cleaning sessions it is recommendable to pour the cleaner from 
the tank, rinse the tank and dry it with a rag. Make sure that no cleaner seeps 
through the air slots in the bottom of the casing into the unit.  
 
 
 
 
 
 
 

Содержание Emmi 20 HC

Страница 1: ...Levels Ultrasonic Controller Easy operation using only two push buttons Adjustable heating from 35 C to 85 C Excellent cleaning with Fexonal WBC 35 PU Löser Standard sizes 2 0 3 0 4 0 and 6 0 litres Highly efficient Including basket and lid Ultrasonic cleaners are maintenance free ...

Страница 2: ...al timer 7 Temperature switch 8 3 Levels Uultrasonic Controller 2 Technical Information Characteristics Emmi 30 HC Length x Width x High mm 265 x 165 x 240 Volume L 2 0 Main source V 230 V 50 Hz Classification IP 20 Max wattage W 150 Ultrasonic transducers 2 ca 38kHz 1 2 3 4 5 6 7 8 ...

Страница 3: ...a longer period of operation 4 Operating Instruction Fill tank with Flexonal WBC 35 PU Löser and plug mains plug into socket By pressing of the mains switch the cleaning time is set the temperature is adjusted with the help of the turning knob Setting on continuous operation also is possible counter clockwise rotation For reasons of safety however we do not recommend such procedure The unit may ru...

Страница 4: ...al developed cleaner Flexonal WBC 35 PU Löser By using our special cleaner please read the additional instruction If cleaning additives by other manufacturers have been used we do not take any responsibility for the parts cleaned in ultrasonic cleaning bath Please do not hesitate to contact us for more detailed information Bachmann Kunststoff Technologien GmbH Rudolf Diesel Str 2 63322 Rödermark G...

Отзывы: