eMachines VC31, Руководство пользователя

Страница: 38 / 52

3 - 12
VC31 Mainboard Manual
Onboard Serial Port 1
If the serial port 1 uses the onboard I/O controller, you can modify your
serial port parameters. If an I/O card needs to be installed, COM3 and
COM4 may be needed. The options are: 3F8/IRQ4, 3E8/IRQ4, 2F8/IRQ3,
2E8/IRQ3, Disabled.
Onboard Serial Port 2
If the serial port 2 uses the onboard I/O controller, you can modify your
serial port parameters. If an I/O card needs to be installed, COM3 and
COM4 may be needed. The options are: 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3,
3F8/IRQ4, Disabled.
UR2 Duplex Mode
Allows you to select the IR modes.
The options are: Half, Full.
Onboard FDC Controller
When enabled, the floppy diskette drive (FDD) controller is activated.
The options are: Enabled, Disabled.
POWER ON Function
Allows you to set the method for powering-on the system. The default
option of BUTTON-ONLY allows system power-on using the standard
system case mounted ON/OFF switch. The option Password allows you
to set up to 5 alphanumeric characters to power-on the system. The option
Any Key allows you to touch the keyboard to power on the system. The
option Keyboard 98 allows you to use the standard keyboard 98 to power
on the system.
UART Mode Select
Allows you to select the IR modes if the serial port 2 is used as an IR port.
Set at Standard, if you use COM2 as the serial port as the serial port,
instead as an IR port. The options are: HPSIR, ASKIR, Normal.
The options are: BUTTON ONLY, Any Key, Keyboard 98.