manualshive.com logo in svg

eMachines IM845GV, Руководство пользователя, Страница: 16 / 32

Поделиться
Скачать
eMachines IM845GV Скачать руководство пользователя страница 16

2-6

Using the BIOS Setup Program

Advanced Menu

This menu is for setting advanced features that are available through the chipset.

Feature 

Options 

Description

CPU Type 

No options 

Displays the processor type.

CPU Speed 

No options 

Displays the processor speed.

Cache Ram 

No options 

Displays the amount of cache RAM.

Plug & Play O/S 

• No 

If you select Yes, the BIOS configures Plug and Play devices when

• Yes 

your system has a Plug & Play operating system.

Reset 

• No 

Yes erases all configuration data in ESCD, which stores the

Configuration Data 

• Yes 

configuration settings for non-PnP plug-in devices. Select Yes when
required to restore the manufacturer’s defaults.

Primary Video 

• PCI 

This option lets you define the type of your video adapter you are

Adapter 

• Onboard 

using for your primary display.

Local Bus IDE 

• Disabled 

Allows you to set the built-in IDE controller you want to use.

adapter 

• Primary
• Secondary
• Both

Large Disk Access 

• Other 

Select DOS if you have DOS. Select Other if you have another

Mode 

• DOS 

operating system such as UNIX. A large disk is one that has more
than 1024 cylinders, more than 16 heads, or more than 63 tracks per
sector.

Legacy USB Support 

• Disabled 

Enables or disables the legacy USB.

• Enabled

Onboard LAN 

• Disabled 

Enables or Disables the onboard LAN. Select Disabled, if you

Control 

• Enabled 

don’t want use onboard LAN function.

Onboard LAN  Boot 

• Disabled 

Use this item to enable and disable the booting from the

ROM 

• Enabled 

onboard LAN or a network add-in card with a remote boot
ROM installed.

I/O Device 

No options 

Configures I/O devices. When selected, displays the I/O Device

Configuration, 

Configuration submenu.

Submenu

Onboard Audio 

No options 

Configures onboard audio. When selected, displays the Onboard

Options, Submenu 

Audio Options submenu.

Hardware Monitor, 

No options 

Reports the speed of the CPU fan and system fan. When selected,

Submenu 

displays the Hardware Monitor submenu.

Содержание IM845GV

































Отзывы:

Нет отзывов