QSG_PPC-4510-KIT_1-00
page 2
Boot Up:
Boot Selection from the HIO-EMB-1200 Board
On the HIO Board, there is a switch with 2 selections, “1”(Default) and
“2”
#1 (Default) : To boot from the iNAND (Default OS Yocto Qt FB )
#2 : To boot from the TF (SD Card)
To build HIO-Yocto Image, Please visit
wiki.hioproject.org
The machine variable for the HIO i.MX6 10.1” Panel
PC is
hio-imx6dl-ppc4510
Plug Yocto Build Micro SD Card into the SD Card Slot
Switch to number 2 on
Insert Molex Connector into the power Adapter and plug into the Power
slot
Machine will boot up and prompt to Enter Login Name
Enter “
root
” for Login Name
Figure 3: Side View
Figure 4: Molex Connector
Molex Connector Pin Layout
8
7
6
5
4
3
2
1
Wire
Pin Function
Yellow
1
GND
Orange
2
TX
Blue
3
Reserved
Gray
4
VCC (24V)
Red
5
SHIELD
Black
6
RX
Green
7
Reserved
Purple
8
GND
