15
The manufacturer
offers you a well-engineered, high-quality PC hardware. For the
software installation, use and maintenance the respective user is responsable.
On the bundled driver CD are Windows and Linux drivers for
the
Touch
PCs included.
If you purchased the system with a SSD, a current image is already
installed with which you can become familiar with the hardware and the use of
the touch-panel.
connect your
touch PC simply with the in delivery included AC
adapter or use an equivalent 12V DC power source with at least 5A DC. To start
the system, press the On / Off button.
To start,
If you have bought
the
touch PC without hard disk and RAM, please follow
the following instructions.
Due to the small size of our touch-PC solutions an installation of a
conventional hard drive due to potential heat problems is not recommended
for model sizes less than 15 ". Please only use SSD drives with 2.5" size and
max. 7mm height or 1.8
”
SSDs. The subsequent
RAM and hard
disk is complicated, for these activities the mainboard must first be taken off.
This should be done only by a computer specialist. Not experienced PC users,
we explicitly recommend to buy a model with memory and hard disk included.
additional screwable DC-connector: The touch PC-series has an additional
screwable power connector. The PIN assignments are: PIN1: +12V DC PIN 2:
GND PIN 3: not used Please take care of the right polarity, otherwise your PC
is irrevocably destroyed. Please see paragraph
“
Components
”
.
l
l
Commissioning and Installation
16
BIOS-settings
In the following, the most important BIOS settings are explained. Please note
that the BIOS is a special BIOS for PC's with built-in display solutions.
Accordingly, it can occur after adjustments to the BIOS that you see no image
on your monitor. For this reason, only experienced users should make changes
to the BIOS. If the system is wrongly adjusted, proceed as described in the
following: press (even if you see no image) on a connected keyboard the Delete
key until you are sure you are in the BIOS. Then press F9 Enter F10 Enter. The
system will reboot and you should have on an external monitor again a picture.
Make sure that you save your changes before leaving the BIOS (F10).
The major graphic settings to use the touch PCs internal built in monitor:
Intel
Video (Intel IGD) Control Sub-Menu
IGD - Boot Type: VBIOS Default
IGD
–
LCD Control Sub-Menu
IGD
–
LCD Panel Type: choose the original resolution of your monitor
l
l
l
l
l
Pre-installation Linux-Software (Optional)
Ubuntu 9.04 has been preinstalled in the Touch-PC with SSD. The User Name
is "user". The password is
„
user123
“
. Please look also on the desktop. There is
a text file with the current password information.
For the calibration please use the preinstalled program "eGalaxy".You can start
the program from the desktop.
If you will change the password, please open a terminal. Type "sudo su", then
press "Enter". The password is "user123". Please chose "passwd user" and
give your new password.
Содержание PPC-080T-D525
Страница 1: ......
