EMAC PCM-53E52, Руководство пользователя

Страница: 11 / 18

PCM-53E52 BIOS Defaults
The PCM-53E52 uses a General Software BIOS. To enter the CMOS you must press the <Del> key when
prompted. The following CMOS screen shots indicate the CMOS options and the default factory values of
each option. Note: These factory set options should not require changing.
+------------------------------------------------------------------------------+
| |
| System Bios Setup - Utility v4.3 |
| (C) 2000 General Software, Inc. All rights reserved |
+------------------------------------------------------------------------------+
| |
| |
| |
| |
| |
| >Basic CMOS Configuration |
| Custom Configuration |
| Shadow Configuration |
| Reset CMOS to last known values |
| Reset CMOS to factory defaults |
| Write to CMOS and Exit |
| Exit without changing CMOS |
| |
| |
| |
| |
| |
+------------------------------------------------------------------------------+
| <Esc> to continue (no save) |
www.gensw.com
+------------------------------------------------------------------------------+
| |
| System Bios Setup - Basic CMOS Configuration |
| (C) 2000 General Software, Inc. All rights reserved |
+---------------------------+--------------------+-----------------------------+
| DRIVE ASSIGNMENT ORDER: | Date:>Jun 18, 2002 | Typematic Delay : 250 ms |
| Drive A: Floppy 0 | Time: 19 : 38 : 16 | Typematic Rate : 30 cps |
| Drive B: (None) | NumLock: Disabled | Seek at Boot : None |
| Drive C: (None) +--------------------+ Show "Hit Del" : Enabled |
| Drive D: (None) | BOOT ORDER: | Config Box : Enabled |
| Drive E: (None) | Boot 1st: Drive A: | F1 Error Wait : Disabled |
| Drive F: (None) | Boot 2nd: Drive C: | Parity Checking : (Unused) |
| Drive G: (None) | Boot 3rd: (None) | Memory Test Tick : Disabled |
| Drive H: (None) | Boot 4th: (None) | Test Above 1 MB : Enabled |
| Drive I: (None) | Boot 5th: (None) | Debug Breakpoints: Disabled |
| Drive J: (None) | Boot 6th: (None) | Splash Screen : Disabled |
| Drive K: (None) +--------------------+-----------------+-----------+
| Boot Method: Boot Sector | IDE DRIVE GEOMETRY: Sect Hds Cyls | Memory |
+---------------------------+ Ide 0: 3 = AUTOCONFIG, LBA | Base: |
| FLOPPY DRIVE TYPES: | Ide 1: Not installed | 640KB |
| Floppy 0: 1.44 MB, 3.5" | Ide 2: Not installed | Ext: |
| Floppy 1: 1.44 MB, 3.5" | Ide 3: Not installed | 31MB |
+---------------------------+--------------------------------------+-----------+
| ^E/^X/<Tab> to select or +/- to modify |
<Esc> to return to main menu