Quick Installation Guide
PCM-4896L Installation Guide 7
CD Audio Connector (J7)
This connector is used to connect to a CD audio cable.
CD Audio Connector (J7)
Pin
Signal
1
GND
2
CD_L
3
GND
4
CD_R
J8
LCD Driving Voltage Select (J8)
You can select the LCD connector CN7 (pin 5 and pin 6) driving
voltage by setting J8. The configurations are as follows:
LCD Driving Voltage Select (J8)
5V
3.3V *
*default
1 2 3
1 2 3
2 1
4 3
6 5
2 1
4 3
6 5
Audio Output Select (J6)
You can select the output mode of onboard audio connector (CN10)
by setting J6.
"Speaker out" is the output signal amplified by onboard amplifier
Audio Output Select (J6)
Line out*
Speaker out
J6
*default
