Page
13
of
20
MSE-218SP User Manual
v1.1 February 2013
ACCESS LEVEL
– Administrators can choose to lock all functions on the amplifier modules
by entering the relevant password – please contact EM Acoustics for further details on this
function.
VERSION INFO
– by pressing the Edit encoder repeatedly, the unit will step through
user information such as software version, hardware version, IP address and MAC
address.
4.3.3 – EXIT Key
The exit key takes you one step back in the menu system from wherever you are for each
press of the key. For example, if you have just adjusted the input gain, pressing the exit
key will take you back to the parameter scroll screen.
4.3.4 - EDIT encoder function
The Edit encoder is the primary control for the user when operating the MSE-218SP. From
the opening display screen (which displays the unit name – which by default is “MSE-
218SP” but can be changed by the user in the remote software – on the top line and the
loaded preset on the bottom line), simply rotating the encoder will display the unit status
in the following order:
INPUT GAIN=>INPUT DELAY=>INPUT SOURCE
Pressing the edit encoder will then allow the user to edit the selected function:
INPUT GAIN
– adjustable by the user from 0dB down to -20dB. This control adjusts
both analog and digital input gains simultaneously.
INPUT DELAY
– adjustable by the user from 0.0ms to 1000ms.
INPUT SOURCE
– this selects either standard analog input, or AES/EBU digital input. If
digital is selected, the yellow “AES/EBU” LED will illuminate between the two XLR
connectors. There are four options – Analog, AES/EBU Left channel, AES/EBU Right
channel and AES/EBU mono sum.
4.4 – Remote Monitoring and Control
By connecting a cat5 Ethernet cable to the RJ45 port on the rear of the unit, remote
monitoring and control can be achieved through the optional remote software. Please see
the remote software manual for more details. The amber “Data” LED will illuminate
showing an active data connection.
