1. Description.
The amp interface allows switching channels and other amp functions via midi messages. In case
of MESA BOOGIE amps, Peavey JSX ( and similar ) no external power is needed.
The interface may replace original footswitch and it is possible to switch all available footswitch
functions by one midi message.
sockets:
Midi IN – Midi socket
AMP FS – connect it into the footswitch socket of the amp
indicator:
RX – Received midi message indicator
switch:
Midi CH. SW. – Midi channel settings switch ( learn mode )
2. Using the interface.
2.1. Starting up the interface
●
Power off the amp
●
Connect the interface
into the amp using original footswitch cable
●
Connect the interface
to the midi controller using standard midi cable
●
Set a valid midi channel
(chapter 2.3)
●
Power on your system
After powering on the interface, RX LED
is blinking for a one second and then goes off.
5
