EM AAA221, Инструкция по установке и обслуживанию

Страница: 13 / 20

4.5 Installation of the ball catch
a Unscrew the ball holder from the housing.
b Slide the housing into the opposite end of the break-out door adaptor and fit it opposite the
recess in the door.
c Check that the recess closes over the housing without interference and adjust roughly by estim-
ating the point where the ball will meet the ball catch shoe. Tighten the two countersunk Allen
screws (M6 x 12).
d Screw in the ball holder until the ball is in contact with the slotted hole in the ball catch shoe
and tighten the lock screw.
e The break-out force can be adjusted, if necessary, with the adjustment screw inside the ball
holder. Clockwise turning increases the break-out force.
f Fit the cover plate in the dovetail slot in the ball catch.
1
5
4
2
6
7
AAA223
3
Ball holder 1
Housing 2
Break-out door adaptor 3
Countersunk Allen screw (2 pcs) 4
Lock screw 5
Cover plate 6
Recess in the door 7
13 Issue 2014-03-20 1003658-EMEI-2.0
4 Installation