9
General Settings and Functions of the BioProTT
TM
FlowTrack SL
The BioProTT
TM
FlowTrack SL is equipped with a display and the following functions are available via the
graphical user interface (GUI).
Please note:
The screens shown are mere examples.
When the display is used but settings (e.g. calibration table, calibration factor) are changed
via the digital interface at the same time, the changes carried out over the digital interface
will only be visible on the display when the specific screen is "flashed", meaning if the user
changes to another screen and back.
The measurement, however, will be immediately affected by the changed setting.
9.1
Screen Saver
The BioProTT
TM
FlowTrack SL is equipped with a screen saver for the display. The screen saver is activated
automatically after a time of 30 minutes if no user action has taken place.
With the activation of the screen saver, the display brightness is set to the mimimum value of 25 % and the
em-tec logo rotates on the screen.
It is possible to deactivate the screen saver and return to the screen that was displayed last by using either
of the arrow buttons.
Please note:
If the arrow buttons are pressed at the same time as the enter or zero button, the screen saver is still active.
9.2 Adjustment of Brightness
It is possible to adjust the display brightness as follows:
Screen
Meaning
The default value is set at 50% brightness. It is possible to set the value to
25, 50, 75, and 100%.
By pressing the enter button, the menu is activated.
By indicating "sel", the user can select the value using the arrow
buttons.
Repeated pressing of the enter button stores the selected value.
Table 8: Brightness Screen
BioProTT™ FlowTrack SL
Copyright em-tec GmbH
Page 25
D101-704 BioProTT
TM
FlowTrack SL – User Manual – V 1.0