ADR4
Installation Manual
EMM_871_4956
Rev 2.8
EM Motorsport Ltd. CONFIDENTIAL PROPRIETARY. All right reserved
11/20
4
Car Looms
4.1
Chassis Loom
The ADR4 needs to be powered from the car power supply, with power
consumption averaging less than 2.5W. During super capacitor charging phase,
currents will temporarily be higher so car wiring should be designed to supply up to
500mA.
4.2
GPS Antenna Loom (optional)
•
The connection at the ADR4 is a SMA female Jack (cable connector is a SMA
male plug).
•
Do not exceed minimum dynamic bending radius of the cables specified on the
manufacturer’s data sheet.
NB: If the ADR4 is being connected to a GPS antenna that is shared with a
system already on the car, then a power isolating splitter should be used to
ensure that the two antenna power supplies are not connected together.
