EM Acoustics FG-HALO-C, Руководство пользователя системы

Страница: 26 / 60

Page 26 of 60
HALO Compact User Manual
V7 December 2019
7.1 - Rigging the HALO-C to an FG-HALO-C
Pin the captive front link on the
FG-HALO-C to the HALO-C
position and remove the quick
release pin from the rear of the
FG-HALO-C.
Set the rear captive link of the
HALO-C
to the extended
position.
To set the HALO-C parallel to
the grid, select the 5-degree
hole. Positions lower than 5-
degrees will produce up-tilt
when required.
Locate the front link of the FG-
HALO-C into the HALO-C and
replace the quick release pin.
Locate the rear link of the
HALO-C into the FG-HALO-C and
re-insert the the quick release
pin into the HALO-C rear link pin
point.
Detailed views of these pin
positions are shown on the
following page.
IMPORTANT NOTE: -
ENSURE ALL PINS ARE SECURED BEFORE LIFTING