9
EKKO
Contents: Page
Warnings for the installer
System set-up.......................................................................................................................................................................................................................... 9
Technical data........................................................................................................................................................................................................................ 10
Dimensions and clearance .................................................................................................................................................................................................... 10
Limitations of use................................................................................................................................................................................................................... 10
Installation dimensions ...........................................................................................................................................................................................................11
Securing the gear motor ........................................................................................................................................................................................................ 13
Unlocking for manual manoeuvre .......................................................................................................................................................................................... 14
Electrical wiring harness ........................................................................................................................................................................................................ 15
User manual .......................................................................................................................................................................................................................... 16
Directive 2002/96/EC (WEEE).
The crossed out bin symbol on the appliance indicates that the product, at the end of its useful working life, must be disposed of separately from nor-
mal household waste, and as such must be taken to a waste sorting and recycling centre equipped to deal with electric and electronic equipment, or
returned to the dealer when a new appliance of the same type is purchased.
The user is responsible for ensuring the appliance is disposed of through the correct channels when no longer in service. Proper sorted waste collection for
subsequent recycling, processing and environmentally conscious disposal of the old appliance helps to prevent any possible negative impact on the envi-
ronment and human health while promoting the practice of recycling materials used in manufacture. For more detailed information regarding available waste
collection systems, contact your local waste disposal service or the shop from which the appliance was purchased.
Risks associated with substances considered hazardous (WEEE).
According to the new WEEE Directive, substances which for some time have been widely used in electrical and electronic equipment are considered haz-
ardous to human heath and the environment. Proper sorted waste collection for subsequent recycling, processing and environmentally conscious disposal
of the old appliance helps to prevent any possible negative impact on the environment and human health while promoting the practice of recycling materials
used in manufacture.
The product complies with European Directive 2004/108/EC and subsequent amendments.
The following safety information is an integral and essential part of the product and must be supplied to the user. Read it carefully as it provides important
guidelines regarding installation, use and maintenance. Always store this module carefully and transfer it to any subsequent users of the system. Incorrect
installation or improper use of the product may constitute a serious hazard.
IMPORTANT - SAFETY INFORMATION
• Installation must be performed by professionally qualified personnel in observance of current national and European legislation.
• After removing the packaging check the condition of the device. If in doubt, consult a qualified technician.
Packaging materials (carton, plastic bags, staples, polystyrene, etc.) must be disposed of in suitable containers and must not be dispersed into the envi-
ronment. Above all they must be kept out of the reach of children.
• The installation, electrical connections and settings must be executed in accordance with sound engineering practice. Make certain that the data on the
data plate conform with the mains electrical supply data and make certain that the section of the connection cables is suitable for the loads applied.
• Do not install the product in environments where there is a risk of explosion or which are disturbed by electromagnetic fields. The presence of flammable
gases or fumes constitutes a serious hazard.
• Equip the mains supply with a suitable overvoltage protection device, a switch/disconnector and/or differential for the product and in conformity with the
standards in force.
• Clearly indicate with an appropriate sign on the gate, rolling door, window or barrier that they are remotely operated.
• ELVOX s.p.a. denies all liability for damage incurred when devices and/or components are used that are incompatible in terms of product integrity, safety
and operation.
• This equipment must be used exclusively as specified in design; any other use is to be considered improper and therefore hazardous.
• Always disconnect the equipment from the power supply by means of the main switch or by removing the plug before performing maintenance or cleaning.
Use exclusively genuine spare parts for repairs and replacements.
• The installer must provide all information regarding operation, maintenance and use of the single parts and the system as a whole
EN
