
GB
TELECAMERA ART. 5GL6
3/4
SAFETY INSTRUCTIONS FOR INSTALLERS
- Carefully read the instructions on this leaflet: they give important information on the safety, use and maintenance of the installation.
- After removing the packing, check the integrity of the set. Packing components (plastic bags, expanded polystyrene etc.) are dangerous for children. Installation must be
carried out according to national safety regulations.
- It is convenient to fit close to the supply voltage source a proper bipolar type switch with 3 mm separation (minimum) between contacts.
- Before connecting the set, ensure that the data on the label correspond to those of the mains.
- Use this set only for the purposes designed, i.e.for electric door-opener systems. Any other use may be dangerous. The manufacturer is not responsible for damage cau-
sed by improper, erroneous or irrational use.
- Before cleaning or maintenance, disconnect the set.
- In case of failure or faulty operation, disconnect the set and do not open it.
- For repairs apply only to the technical assistance centre authorized by the manufacturer.
- Safety may be compromised if these instructions are disregarded.
- Do not obstruct opening of ventilation or heat exit slots and do not expose the set to dripping or sprinkling of water.
- Installers must ensure that manuals with the above instructions are left on connected units after installation, for users' information.
- All items must only be used for the purposes designed.
- The ominipolar switch must be easily accessed.
-
WARNING:
to avoid the possibility of hurting yourself, this unit must be fixed to the wall according to the installation instructions.
- This leaflet must always be enclosed with the equipment.
Directive 2002/96/EC (WEEE)
The crossed-out wheelie bin symbol marked on the product indicates that at the end of its useful life, the product must be handled separately from household refuse
and must therefore be assigned to a differentiated collection centre for electrical and electronic equipment or returned to the dealer upon purchase of a new, equiva-
lent item of equipment.
The user is responsible for assigning the equipment, at the end of its life, to the appropriate collection facilities.
Suitable differentiated collection, for the purpose of subsequent recycling of decommissioned equipment and environmentally compatible treatment and disposal, helps pre-
vent potential negative effects on health and the environment and promotes the recycling of the materials of which the product is made. For further details regarding the col-
lection systems available, contact your local waste disposal service or the shop from which the equipment was purchased.
Risks connected to substances considered as dangerous (WEEE).
According to the WEEE Directive, substances since long usually used on electric and electronic appliances are considered dangerous for people and the environment. The
adequate differentiated collection for the subsequent dispatch of the appliance for the recycling, treatment and dismantling (compatible with the environment) help to avoid
possible negative effects on the environment and health and promote the recycling of material with which the product is compound.
Camera supply connector
Video signal connector
-
+
GND
VIDEO
FEATURES
NIGHT AND DAY COLOR (DSP) CAMERA 1/3”
WITH 25mm FIXED LENS
SPECIFICATIONS
PICK-UP DEVICE
1/3” SONY Inter-line HAD CCD
EFFECTIVE PICTURE ELEMENTS
STANDARD PAL 1Vpp 75 Ohm
IMAGE PICTURE ELEMENTS
500 (H) x 582 (V)
HORIZONTAL RESOLUTION
420 TV lines
MINIMUM ILLUMINATION
Led off – 0,04 Lux (F 1,6 Agc on, 10 IRE)
0,6 Lux (F 1,6 Agc on, - 50 IRE)
0 Lux IR LED on
ILLUMINATION DISTANCE
Approx. 50m
ILLUMINATION
24 x 850nm High Light LEDs
SIGNAL TO NOISE RATIO
MORE THAN 48 dB
AUTO ELECTRONIC SHUTTER
PAL: 1/50s ~ 1/110,000s
GAIN CONTROL
AGC AUTOMATICALLY
WHITE BALANCE
AUTOMATICALLY (2500K ~ 9500K)
GAMMA CHARACTERISTIC
0.45
LENS 25mm
SYNCHRONOUS
INTERNAL
BACK LICHT
AUTOMATIC
VIEW ANGLE
15 Degree
POWER SUPPLY
12 VDC ± 10%
PROTECTION STANDARD
IP66
POWER CONSUMPTION
4.8W (Max.)
OPERATING TEMPERATURE
-10° C ~ + 50° C (14 °F to 122 °F)
EXTERNAL DIMENSIONS
(ø) 170 mm x (H) 58 mm
EXTERNAL CONNECTIONS
BNC
HOUSING
Alloyed Aluminium, silver/iron grey
HIGH LIGHT LED IR
TRADITIONNAL LED