46CAM.112
Istruzioni
User manual
SPECIFICATION
Model No
46CAM.112
Sensor
720P sensor
Effective pixels
1296(H)x732(V)
Video Frame Rate
25/30 fps@720P
Max transmission distance
500 m
Video Format
PAL/NTSC
Mini Illumination
0 Lux (IR ON)
S/N Ratio
more than 50dB (with AGC OFF)
BLC
Auto
AGC
Auto
NR
Auto
White Balance
Auto
Day / Night
Support ICR
Sync code
Internal
Voltage
12 Vdc
Current
350mA±15%(IR ON); 75mA±15%(IR OFF)
IR CUT
Auto
Lens
2,8 - 12 mm HD Lens
IR range
30m
Waterproof standard
IP66
Video output
AHD
Storage Temperature
-20°C ~70°C
Operate Temperature
-10°C ~ 50°C RH 90% MAX
Size (mm)
198(L) * 90(W) * 114(H)
Weight
450g ±15%
*Specifications subject to change without notice.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL
AHD IR Bullet cam, 1 Mpxl, 2.8 - 12 mm lens
1. Use the Appropriate Power Supply
The input power for the camera is 12Vdc. Be sure to connect it to the
appropriate power. Wrong connection may cause malfunction and/or
damage to the video camera.
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are
no user serviceable parts inside. Ask a qualified service person for ser-
vicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could
be damaged by improper handling or storage.
4. Do note use strong or abrasive detergents when cleaning the camera
body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard
to remove. Use a mild detergent and wipe gently.
5. Clean the sensor faceplate with care.
When cleaning the sensor panel, do not use strong or abrasive deter-
gents.Use a piece of lens tissue or cotton tipped applicator and ethanol.
6. Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely bright-
objects that causes mear to appear irrespective of whether the camera
is operating or not.
This can damage the sensor.
7. Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless commu-
nication device which emits strong electromagnetic field, some irregu-
larity such as noise on monitor screen may happen.
FEATURES
- 1.0 Megapixel high performance CMOS sensor with 25/30fps@720P.
- Built in IR-CUT, ensure the camera work properly both day and night.
- IP66 waterproof standard.
1. Fix the camera to the needed place with the four pieces of screws.
2. Loosen the horizontal adjusting ring, adjust it to the needed place, then
fix the horizontal adjusting ring.
3. Loosen the angle fixing screw, adjust it to the needed place, then fix the
angle fixing screw.
PARTS INSTRUCTION AND INSTALLATION
1
2
3
Long-effective IR Light Source Design
Other brands
Service Life
IR Sensnsitivity
1 yr
2 yr
3 yr
4 yr
49400877A0 00 15 10
VIMAR - Marostica - Italy
Vimar SpA: Viale Vicenza, 14
36063 Marostica VI - Italy
Tel. +39 0424 488 600 - Fax (Italia) 0424 488 188
Fax (Export) 0424 488 709
www.vimar.com
DESCRIPTION
The waterproof IR camera adopt 1.0 mega pixels 720P@25/30fps high per-
formance HD sensor. The camera adopt new material with IP66 waterpro-
of standard, IR-CUT filter, smart-IR control. Fashionable and professional
design.
ATTENTION
Thank you for your purchasing this product. Before attempting to connect
or operate this product, please read these instructions carefully and save
this manual for future use.
DIMENSION (mm)
- Long-life IR LED design, whose bright-
ness is several times higher and ser-
vice life longer than ordinary LED’s
- SMART-IR, 30 meters IR range
- Image transmission up to 500 meters.
BNC (video output)
Power
198
131
114
85
90
70
1
2
3