81
3. Select “Open in 32- bit mode”.
10.3.1 Via LAN
1. After starting Apple computer, click Apple icon. The following window will pop up.
Please select “System Preferences”
“Internet &Wireless”
“Network”.
2. Go into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC.
3. After acquiring the IP address, Subnet Mask and so on, please go to the DVR‟s Main Menu
Setup
Network interface to manually input IP ad
-
dress, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC. If using DHCP, please enable
DHCP in the DVR and router.
4. After the above information is completed, you can enter LAN IP and http port in the Safari browser. For example: input http://192.168.1.100:81(here
192.168.1.100 is LAN IP of DVR, 81 is the http port of DVR), and click “
”button. Then the browser will download Active X control as shown below:
5. Click
icon and then select the Active X control, the welcome interface will be shown.
Click “Continue”
“Install” button, the following window will pop up:
EN
Содержание 46540.F04
Страница 95: ...93 ...