50
GB
DRYING PROGRAMME
The drying cabinet has two automatic pro-
grammes:
• Normal dry
• Extra dry
The automatic programmes stop the drying
process automatically when the laundry is dry.
Selecting the drying programme
• Normal dry – used for drying medium-
weight garments.
• Extra dry – used for drying heavier gar-
ments and for deep-drying.
Starting the drying programme
• Last-used drying programme .
Press the power button to turn the cabinet
“ON” – the display lights up and shows the last
programme that was run.
If you want to use this programme press
START/STOPP.
Or select a different drying programme using
arrow up orarrow down.
Then start the programme by pressing the
START/STOP button.
• Door open .
If the door is open when a drying programme
is selected and the START/STOP button is
pressed, the display will show “close door”.
Close the door, and the chosen drying pro-
gramme should start.
• Drying .
The animated status bar on the left of the dis-
play shows that drying is in progress.
• Condensed water tank
When the condensed water tank is full the dry-
ing process stops immediately and the display
shows “check water tank”. Empty the water
tank and restart the drying process.
• Cool-down
During the cool-down phase the display shows
“cool” and the 5-minute rest time is counted
down.
• Programme finish
When the cool-down phase ends, the drying
process is complete and the display shows
“finish” (flashing).
When the START/STOP button is pressed or
the door is opened the current programme
ends and the display shows the last-used
programme.
____________________________
NOTE!
In standby mode the display is switched off
after 15 minutes and lights up again if one of
the buttons on the control panel is pressed or
the door is opened.
____________________________
NOTE!
Empty the condensed water tank after each
drying cycle.
____________________________
Ending the drying programme
To interrupt the drying phase, press START/
STOP.
Opening the door
If the door is opened during drying, the drying
phase will continue for 5 minutes. The display
shows “close door” and the programme will
start a 5 minute count-down.
If the door is closed within this 5-minute period
the drying phase will continue.
If the door is left open the drying phase will be
cancelled after 5 minutes and will have to be
restarted manually.
If you want to end the drying phase imme-
diately, without the 5-minute pause, press
START/STOP.