9
CTK3170X
GB
1. Button function:
1. “40°C”: The temperature setting is
40°C after pressing this button.
2. “70°C”: The temperature setting is
70°C after pressing this button.
3. “85°C”: The temperature setting is
85°C after pressing this button.
4. “100°C”: The water will be heated up
to boiling after pressing this button.
5. “START/STOP”: Start/shutoff the
unit.
6. “KEEP WARM”: Start or stop the
KEEP warm.
2. Description of operation
Preparation: place the kettle on a flat and level table and plug in accordingly. Fill
the kettle with enough water (the water level must not be lower than the MIN mark
or higher than the MAX mark).
The appliance will carry out a self-check routine and give an audible signal. It will
then go into standby mode.
Standby mode: press one of the buttons to set the temperature. Then press the
“START/STOP” to start heating. The appliance will give an audible alarm when it
has reached the set temperature and will enter standby mode automatically.
When you press “START/STOP” in standby mode the appliance will heat the water
to the last temperature setting you selected. If the unit is unplugged and then
plugged back in, it will enter standby mode. If you press “START/STOP” now, the
default temperature setting will be 100°C (Boil).
Press “KEEP WARM” in standby mode to start the keep warm function. Press
“KEEP WARM” again to shut off. When the appliance is in KEEP WARM mode you
can press “START/STOP” to start heating. When it reaches the set temperature,
the appliance will enter KEEP WARM mode automatically.
WARNING:
Do not remove the lid while the water is
boiling.
CAUTION:
Position the lid so that steam is directed
away from the handle.
CAUTION:
Insure that the appliance is switched off
before removing it from its stand.
Button display
