GB
40
• WARNING – Make sure that
ventilation openings in the exterior
or interior of the appliance are not
obstructed.
• WARNING – Do not use tools
or other means to speed up the
defrosting process, other than
recommended by the manufacturer.
• WARNING – Do not damage the
refrigerant circuit.
• WARNING – Do not use electrical
devices inside the appliance,
except where recommended by the
manufacturer.
• WARNING – The refrigerant and
insulating materials are flammable.
When disposing of the appliance,
take it to an authorized recycling
facility. Do not expose the appliance
to fire.
Refrigerant
Isobutene refrigerant (R600a) is used
in the refrigeration circuit. This is a
naturally occurring gas that is relatively
environmentally friendly, but it is still
flammable. Make sure that none of the
components of the refrigeration circuit
are damaged during transport and
installation. The refrigerant (R600a) is
flammable.
Warning: risk of fire
If the refrigeration circuit is damaged:
• Avoid open flames and sources of
ignition.
• Make sure the room where
the appliance is located is well
ventilated.
It is dangerous to alter technical data
or modify this product in any way. Any
damage to the power cord can cause
a short circuit, fire and/or electric
shock.
Electrical safety
• Do not extend the power cord by
using an extension cord.
• Make sure the plug is not crushed
or damaged. A crushed or damaged
plug may overheat and cause a fire.
• Make sure you have access to the
appliance’s plug.
• Do not pull on the power cord.
• If the power socket is loose, do not
plug in the appliance. Otherwise
there is a risk of electric shock or
fire.
• Do not use the appliance if the
cover is missing from the interior
light.
• The appliance is designed to
be powered by a single-phase
AC supply, 220–240 V/50 Hz.
If local voltage variations mean
that the voltage may vary outside
this range, an automatic voltage
regulator rated for a minimum