GB
82
Water softener
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water that would have an adverse effect on the opera
-
tion of the appliance.
The more minerals there are, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area.
Your local water authority can advise you on the hardness of the water in your area.
Adjusting salt consumption
The dishwasher is designed to let you adjust the amount of salt consumed based on the hardness of the water used. This is
intended to optimize and customize the level of salt consumption.
1. Close the door and switch on the appliance;
2. Within 60 seconds after pressing the Power button, press the Program button for more than 5 seconds to enter water
softener setup mode;
3. Press the Program button to choose the setting that matches the water quality in your area; The settings will change in
the following sequence: H3->H4->H5->H6->H1->H2->H3;
4. To exit setup mode, press the Power button or leave the setting unchanged for 5 seconds.
WATER HARDNESS
0 - 5
6 - 11
12 - 17
18 - 22
23 - 34
35 - 55
German
°dH
French °fH
British
°Clarke
0 - 9
10 - 20
21 - 30
31 - 40
41 - 60
61 - 98
0 - 6
7 - 14
15 - 21
22 - 28
29 - 42
43 - 69
mmol/
0 - 0.94
1.0 - 2.0
2.1 - 3.0
3.1 - 4.0
4.1 - 6.0
6.1 - 9.8
Water softener level
H1 -> Rapid light is lit
H2 -> 90 min light is lit
H3 -> Rapid, 90 min lights are lit
H4 -> Glass light is lit
H5 -> Rapid, Glass lights are lit
H6 -> 90 min, Glass lights are lit
Salt consumption
(grams/cycle)
0
9
12
20
30
60
1° dH = 1.25° Clarke =1.78° fH = 0.178 mmol/l
Default setting: H3
Contact your local water supplier for information on the hardness of your water supply.
Содержание CDM5600V
