Elvex 46617.338, Руководство пользователя

Страница: 46 / 60

- MANUAL : Select this to fine-tune White Balance manually. Set White Balance first by
using the ATW or AWC mode. After that switch to MANUAL mode, fine-tune the
White Balance and then press the Function Setup switch.
NOTE
◆
White Balance may not work properly under the following conditions.
In this case select the AWC mode.
1. When the color temperature of the environment surrounding the subject is out of
the control range(e.g. clear sky or sunset).
2. When the ambient illumination of the subject is dim.
3. If the camera is directed towards a fluorescent light or is installed in a place
where illumination changes dramatically, the White Balance operation may
become unstable.
Day&Night
You can change the color mode of color or black / white by setting up the mode.
1. Select Day&Night using the Up or Down button on the Set Up menu screen.
2. Select the desired mode using the Left or Right buttons.
SETUP
1. FOCUS
2. EXPOSURE
3. WHITE BAL
4. DAY&NIGHT
5. BACKLIGHT
6. DNR
7. IMAGE ADJ
8. SPECIAL
9. RESET
10. EXIT
OFF
18
CCTV
EN