© 2020, Elvaco AB. All rights reserved. The documentation and product are provided on an “as is” basis only and may contain deficiencies or in-
adequacies. Elvaco AB takes no responsibility for damages, liabilities or other losses by using this product. No part of the contents of this manual
may be transmitted or reproduced in any form by any means without the written permission of Elvaco AB. Printed in Sweden.
CMi4170 Quick Manual English
Version: 1.0
CONTACT INFORMATION
Elvaco AB Technical support:
Phone: +46 300 434300
E-mail: [email protected]
Online: www.elvaco.com
User interface
Green LED & Red LED
Indication for start-up / reboot /
switch-off
Push button
Start-up / reboot / switch off
module
Configuration
Elvaco OTC app, Downlink or
Engelmann optical configuration
tool “Device Monitor”
Approvals
EMC
EN 301 489-1, EN 301 489-3
LoRa Alliance
LoRaWAN® Certified
SAFETY
The warranty does not cover damage to the product caused by usage in
any other way than described in this manual. Elvaco AB can not be liable
for personal injury or property damage caused by usage in any other way
than described in this manual.
SERVER CONFIGURATION
Before CMi4170 is able to transmit messages on the LoRaWAN network,
device information needs to be added to the network server. More
specifically, the following parameters needs to be registered (in OTAA
mode) in order to enable the network server to receive messages from
the module:
•
Device EUI (16-digit number printed on the device label)
•
Application key
•
Join EUI
NOTE
If activation mode is set to “ABP” the following information will be
needed: Network session key, Application session key and Device
address.
TECHNICAL SPECIFICATIONS
Mechanics
Dimensions
29 x 56 x 12 mm
Weight
9 g
Mounting
In module slot of Engelmann
Sensostar S3/S3C
Electrical connections
Supply voltage
Internal meter battery or PSU
(Engelmann External Power
Supply)
Electrical characteristics
Nominal voltage
3.0 VDC
Power consumption (max)
50 mA
Power consumption (sleep mode) ~2.5 µA
Environmental specifications
Operating temperature
+5 °C to +55 °C
Operating humidity
0 - 93 % RH, no condensation
Operating altitude (max)
2000 m
Usage environment
Indoors
Storage temperature
-20 °C to 60 °C
EU DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Elvaco AB, Kabelgatan 2T, S-434 37 Kungsbacka, Sweden.
Product
Year of CE-marking
CMi4170
2020
The object(s) of the declaration listed above is in conformity with the relevant Community
harmonization legislation:
Radio Equipment Directive (RED) 2014/53/EU
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
RoHS 2011/65/EU
And are in conformity with the following harmonization standards or other normative documents:
EN 62368-1 2018 (Safety requirements for information and communication technology equipment)
EN 301 489-1 v2.2.3 (EMC standard for radio equipment and services)
EN 301 489-3 v2.1.1 (EMC standard for radio equipment and services)
EN 300220-1 v3.1.1 (SRD Low power radio equipment)
EN 300220-2 v3.2.1 (SRD Low power radio equipment)
EN 55032 CISPR 32 2015 (Radiated emission)
EN 61000-4-2 2008 (Immunity to ESD)
EN 61000-4-3 2006 (Immunity to RF field)
EN 61000-4-4 2012 (Immunity to electrical fast transient/burst)
EN 61000-4-5 2017 (Immunity to surge measurement)
EN 61000-4-6 (Immunity to HF injections)
EN 61000-4-11 (Immunity to voltage dips/short interruptions and variations)
Kungsbacka, Sweden, 2020-01-13
Håkan Saxmo, Chief Technology Officer
Radio characteristics
Frequency
868 MHz
Output power
14 dBm
Receiver sensitivity
-135 dBm
LoRaWAN characteristics
Device class
Class A, Bi-directional
LoRa version
1.0.2 Rev B
Activation
OTAA or ABP
Data rate
DR0-DR5 (250 bit/s-5470 bit/s)
