Product
Part number
Description
CMi2110
(gen.3)
1050122
Integrated MCM for L+G UH50,
Gateway for Mobile Network
CMip2110
1050055
Power supply 24 VAC
CMip2110
1050053
Power supply 100-240 V
contAct InforMAtIon
elvaco AB technical support:
Phone: +46 300 434300
E-mail: support @elvaco.com
Online: www.elvaco.com
technIcAl sPecIfIcAtIons
Mechanics
Protection class
IP54
Mounting
In Gyr UH50
SIM card
Slide, standard size
Electrical connections
Supply voltage
WZU-AC 110/230-50 or WZU-ACDC24-50
Connection M-Bus
Push-pull connector, cable area 0,2-0,75
mm²
Electrical characteristics (WZU-AC 110/230-50)
Nominal voltage
100-240 VAC (+/- 10%)
Frequency
50/60 Hz
Power consumption (max) <6 W
Power consumption (nom) <1 W
Installation category
CAT 2
User interface
Green LED
Power
Red LED
Error
Yellow LED
GSM status
Push button
Factory reset
Configuration
SMS, HTTP, GSM CSD, Telnet
Integrated M-Bus Master
M-Bus baud rate
2400 and 9600 bit/s
Nominal voltage
28 VDC
Maximum unit loads
8T/12 mA (in addition to the meter in
which the MCM is mounted)
Maximum cable length
1000 m (100 nF/km, maximum 90
Ω
)
Approvals
EMC
EN 61000-6-2, EN 61000-6-3, EN 301 498-
1, EN 310 489-7
Safety
EN 61010-1, CAT 2
orderIng InforMAtIon
sAfety
The warranty does not cover damage to the product caused
by usage in any other way than described in this manual.
Elvaco AB can not be liable for personal injury or property
damage caused by usage in any other way than described in
this manual.
status report indicates missing APn
This may be due to the fact that the auto APN detection is
missing information about your network provider. The APN can
be set manually. See the CMi2110 Operations guide for more
information.
e-mail settings have been configured but no e-mails are received
This may be due to one of the following reasons:
•
No/no valid recipients have been set. Set recipients by
using the command
qset email [recipient]
.
•
The wrong SMTP server is set. Check current SMTP
server by using the command
status
. If no SMTP server
has been set, use the command
qset
email [recipient]
[server]
to set it manually.
•
The report is not correctly activated. Use the command
sch
to schedule e-mail Push Reports (see table).
•
There is not enough credit on the SIM card.
All manuals and user guides at all-guides.com
