6
Entering the alignment value
The rain gauge has been set to a high degree of accuracy ex
works so that you normally do not need to align it.
Simply press „
NEXT
“ to take over the factory settings.
Otherwise the alignment value will have to be determined
first of all in normal mode (see chapter 13 d) on page 27).
Enter the previously determined alignment value using the
keys „
+
“ and „
-
“.
Press „
NEXT
“ to set the unit for measuring rain.
Selecting the unit for rainfall
measurement
The unit for the rainfall quantity is displayed in the field „RAIN“
where you can chose between l/m
or mm.
Select the desired unit using the keys „
+
“ and „
-
“.
Press the „
NEXT
“ key. After that, you can allocate the pro-
gression display.
Allocating the progress display
You can allocate the following display types to the graphic
progression display:
• atmospheric pressure
• interior temperature
• exterior temperature
If the progress display is allocated to one of the two tempe-
rature displays, the symbol „ “ appears in the display field
concerned in addition.
Overlay/identification in the display field:
P = atmospheric pressure
O = outdoor temperature
I = indoor temperature
Select the desired allocation using the keys „
+
” and „
-
”.
Press the key „
NEXT
“, after that, the unit for the wind velocity
measurement can be entered.
-
NEXT
+
rain
quantity
unit
-
NEXT
+
assigning
progress
display
-
+
alignment
value
NEXT