9
4.3. Setting sensor address for outdoor sensor
- Commissioning and addressing the outdoor sensor is
to be performed in accordance with their respective
instructions.
- First position the outdoor sensor near the barometer
and then carry out addressing on the barometer as
follows:
- Press the middle button on the back for approximate-
ly 2 seconds until “SEN x” appears in the display. The
“X” stands for a sensor address.
- Using the upper button, you can now select the
address (1-8) set on the sensor.
- Once the sensor is selected, no further buttons need
to be pressed. The device exits the setting mode
automatically after about 5 seconds.
- Now the automated synchronisation with the outdoor
sensor takes place. This process takes 6 minutes.
During this time it is not possible to operate the device.
4.4. Indicators and indicator adjustment
4.4.1. Air pressure, forecast, trend
- The analogue air pressure indicator is located on
the outer edge. The current air pressure (950 to
1,050 hPa) is indicated by an arrow.
- In the centre below is the numerical display of this
air pressure value in an expanded range between
300 to 1,100 hPa.
- At the top of the display the local weather forecast
is indicated by weather icons (sunny, fair, cloudy,
rain).
- At the bottom is a trend display for the air pressure
