Elura speaker enclosures are constructed of rugged ABS plastic that will provide years of service without substan-
tial deterioration from weather. Whenever possible, we recommend mounting the speakers under the house eve
(roof ) or overhang to protect from excessive sunlight and constant exposure to weather. After the brackets are
securely mounted to the exterior wall and wires are in position in the correct location, you are ready to install the
speaker enclosure to the bracket.
Place the speaker in the bracket and attach using the threaded nuts at each end and hand tighten. Connect the
positive and negative wires, making sure to observe polarity – usually wiring will correspond in color to the push
terminals, red to red (+) and black to black (-). After the wires are securely connected, rotate the speaker toward the
listening area.
PAINTING & COSMETICS
You may paint Elura speakers to match the exterior house color but we advise painting in a separate location prior
to installation. Always remove the grilles from the enclosure for painting, taking care to not clog the perforated
grille holes with excess paint. When painting the enclosure, cover the speaker front to avoid paint overspray on the
cone materials as this will effect acoustic performance. Replace the grilles when fully dried and proceed with final
installation.
MISSION STATEMENT
All Elura speakers are designed with the latest acoustic and cosmetic innovations. It is our policy to continually
improve performance, mechanical function and cosmetics and we reserve the right to change specifications to
incorporate the latest improvements at our discretion.
PRODUCT WARRANTY
Elura speaker products are guaranteed to meet or exceed the specifications included in this manual and carry with
them a lifetime limited warranty under normal conditions of use. This warranty covers free parts and labor on all
components with the obligation that Elura will repair or replace any component found defective in materials or
workmanship. This warranty does not apply to products that have been abused, incorrectly installed, modified,
disassembled and/or repaired by anyone other than Elura or our appointed repair facility. Products qualified under
this warranty must be returned to the factory or a service center designated by Elura, with all transportation and
insurance charges pre-paid.
SPEAKER SPECIFICATIONS
OUT6.5B / OUT6.5W
Speaker Type: Outdoor, 2 way
Woofer: 6.5” injection polypropylene cone
Tweeter: 1“ Aluminum
Power: 5-100 Watts
Impedance: 8 ohms
Frequency Response: 50-20K Hz
Sensitivity: 91 dB
Grille Type: Micromesh, Aluminum
Mounting: Standard “U” shaped bracket
Color Available: Black, White
Finish Dimension: 8.5” (215mm) x 13.4 (340mm) x 7.5” (192.5mm)
