7-
DMX 512 Address Setting
Press the
MENU
button up to when
is shown on the display. Pressing the
ENTER
button and the display will blink. Use the
DOWN
and
UP
buttons to change the DMX 512
address. Once the address has been selected, press the
ENTER
button to setup or
automatically exit menu mode without any change after one minute. Back to the previous
functions without any change press the
MENU
button.
Channel Mode
Press the
MENU
button up to when
is shown on the display. Pressing the
ENTER
button and the display will blink. Use the
DOWN
and
UP
buttons to select the
(4
channels mode) or
(5 channels mode) or
(7 channels mode). Once the
mode has been selected, press the
ENTER
button to setup or automatically exit menu mode
without any change after one minute. To go back to the functions without any change press
the
MENU
button.
Slave Mode
Press the
MENU
button up to when
is showing on the display. Pressing the
ENTER
button and the display will blink. Use the
DOWN
and
UP
buttons to select the
(Master)
(Slave 1) or
(Slave 2) mode. Once the mode has been selected,
press the
ENTER
button to setup or automatically return to the main functions without any
change after one minute. To go back to the functions without any change press the
MENU
button again.
Show Mode
Press the
MENU
button up to when
is shown on the display. Pressing the
ENTER
button, Use
DOWN
and
UP
buttons to select the
(Random show) or
(color)
or
(fade), if you select the color or fade mode, press
the
ENTER
button to confirm,
and use the
DOWN
and
UP
buttons to select color 1-10 or fade speed (speed 1: slow, speed
2: middle, speed 3: fast). Once selected, press the
ENTER
button to setup or automatically
exit menu mode without any change after one minute. To go back to the last function without
any change press the
MENU
button.
8-
Dimmer Mode
Press the
MENU
button up to when
is showing on the display. Pressing the
ENTER
button and the display will blink. Use the
DOWN
and
UP
buttons to select the
(Dimmer Mode 1:
Optically Linear
) or
(Dimmer mode 2:
Square Law
) or
(Dimmer mode 3:
Inverse Square Law
) or
(Dimmer mode 4:
S-cure
) mode. Once
the mode has been selected, press the
ENTER
button to setup or automatically return to the
main functions without any change after one minute. To go back to the functions without any
change press the
MENU
button again.
Optically Linear:
The increase in light intensity appears to be linear as DMX value is
increased.
Square Law:
Light intensity control is finer at low levels and coarser at high levels.
Inverse Square Law:
Light intensity control is coarser at low levels and finger at high levels.
S-cure:
Light intensity control is finger at low levels and high levels and coarser at medium
levels.
Sound
Press the
MENU
button up to when
is shown on the display. Pressing the
ENTER
button, Use the
DOWN
and
UP
buttons to select the
(sound on) or
(sound
off).
Once selected, press the
ENTER
button to setup or automatically exit menu mode
without any change after one minute. To go back to the functions without any change press
the
MENU
button
