www.elumen8.co.uk
Liberty 1T36 Battery Uplighter
User Manual
6
Master/slave mode:
To set the master unit, press the
“MODE”
button on the rear of the master unit then select your
desired program (sound active, auto, static colour, colour fade or one of the built-in programs).
To set the other units in slave mode, press the
“MODE”
button on the rear of the unit to show “SLAVE
MODE” on the LED display and press the
“ENTER”
button to confirm the setting. The unit will now run in
sequence with the master unit.
To exit out of any of the above options, press the
“MODE”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Sound active mode:
To access the sound active mode, press the
“MODE”
button on the rear of the unit to show “SOUND
SENS” on the LCD display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set
the sound sensitivity level from 00 - 31. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MODE”
button.
Dimmer response:
To access dimmer response, press the
“MODE”
button on the rear of the unit to show “DIMMER
RESPON” on the LCD display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons
to select between “DIMMER RESPON01” (LED dimming), or “DIMMER RESPON02” (halogen dimming).
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MODE”
button.
Power mode:
(this gives you the option to have the unit illuminated or off whilst charging)
To access the power mode, press the
“MODE”
button on the rear of the unit to show “POWER” on the
LCD display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons set to ON or OFF.
ON
- the unit will be illuminated whilst charging
OFF
- the unit will be off whilst charging
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MODE”
button.
