Elumen8 KUDOS CYCLONE, Руководство пользователя

Страница: 12 / 37

11
software in the unit. To go back to the functions press the MENU button again. Press and hold the
MENU button for about one second or wait for one minute to exit the menu mode.
PRO defaults
To select PRO defaults , press the ENTER button to show PRO DEFAULTS on the display. Use the
DOWN / UP button to select Yes (run built-­‐in program to set the fixture to PRO Defaults settings)
or No . Press the ENTER button to setup, to go back to the functions without any changes press the
MENU button again. Press and hold the MENU button for about one second or wait for one
minute to exit the menu mode.
Reset
To select Reset , press the ENTER button and all channels of the unit will return to their standard
position.
3.3 Home Position Adjustment
In the main functions, hold the ENTER button for at least 3 seconds to go into offset mode, use
the DOWN / UP button up to select the Pan Offset , Tilt Offset or Rotation Offset , and press the
ENTER button to confirm. Use the DOWN / UP button to adjust the home position (-­‐127 ~ 127) of
the Pan, Tilt, and Rotation. Once the position has been selected, press the ENTER button to setup,
to go back to the functions without any change press the MENU button again. Press and hold the
MENU button for about one second or wait for one minute to exit the menu mode.
4. How To Control The Unit
You can operate the unit in three ways:
1. Master/slave built-­‐in pre-­‐program function
2. Easy controller