ELTRONIKA sp. z.o.o.
Ul. Warszawska 41 lok.7
05-092 Łomianki
www.eltronika.com
- Polska: +48 22 751 97 44
- Česká republika: +420 228 880 487
- Slovensko: +421 904 540 707
38
If you want to configure CARP, please choose network interface on which CARP
client will be available and choose group identifier that will be same on all devices in
group-it has to be number from 1 to 255. Enter virtual shared IP address. Advertisement
frequency and skew regulate how often devices will be contacting each other.
Remember to define up script and down script that will set/delete routings when
becoming master/backup.
7.2.17
NTRIP configuration page
One of /dev/ttyS0 port modes is communication with external device using
NTRIP protocol. If you decide to use it, it is necessary to set the mode under RS232 Port
configuration page. Then, enter settings in NTRIP page. Server address, port and initial
position fields are necessary. Username and passwords are optional.
It is also possible to choose data request mode. After entering required data,
please click Get List button to download data streams list from the server – it may take a
while, please be patient. After downloading the list please select one of data streams.
Attention:
Entering initial position is necessary to login to NTRIP server if no
external device sending NMEA frames is connected to the S0 port.
