Eltrinex LS&S 221105, Инструкция по эксплуатации

Страница: 12 / 34

12
Loop playback
Press M button shortly during playback to choose the starting
point of the loop recording. Press the M button shortly again
to choose the end point of loop recording. The loop
automatically start to repeat. To reset this function, please
press the M button again.
Connecting with PC
Connect the voice recorder with PC using the USB cable and
wait for automatic drivers installation to finish. The internal
memory of the voice recorder appears in PC as a new drive. If
the SD card is inserted, it appear as another drive. Your
recordings can be found in the VOICE folder, in subfolders
A,B,C,D.
Before disconnecting the USB cable, please always use the
„remove hardware“ function, which is indicated by icon in
the system tray of windows (bottom right).
Warning:
Disconnecting the voice recorder without using this function
may cause damage or loss of data.
Outdoor recording
The voice recorder is equipped with two soft foam
microphone shields. Please put these shields on while
recording in windy environments.