ELTEX WOP-2L, Руководство пользователя

Страница: 39 / 65

WOP-2L. User manual
39
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Shapers
Show – display configuration field;
VAP Limit Down – restriction of bandwidth in the direction from the access point to the clients (in total)
connected to this VAP, Kbps;
VAP Limit Up – restriction of bandwidth in the direction from the clients (in total) connected to this VAP, to
the access point, Kbps;
STA Limit Down – restriction of bandwidth in the direction from the access point to the clients (each
separately) connected to this VAP, Kbps;
STA Limit Up – restriction of bandwidth in the direction from the clients (each separately) connected to this
VAP, to the access point, Kbps.
To apply a new configuration and save setting to non-volatile memory, press 'Apply'. Press 'Cancel' to discard the
changes.
5.7 The 'Network Settings' menu
5.7.1 The 'System Configuration' submenu
Hostname – nertwork name of the device, specified by string from 1 to 63 characters; latin uppercase and
lowercase letters, numbers, hyphen '-' (hyphen can not be the last character in the name);
AP Location – domain of the EMS management system tree host where the access point is located;
Management VLAN :
Disabled – Management VLAN is not used;
Terminating – the mode in which the management VLAN is terminated at the access point; in this
case, clients connected via the radio interface do not have access to this VLAN;
Forwarding – the mode in which the management VLAN is also transmitted to the radio interface
(with the appropriate VAP configuration).
VLAN ID – the VLAN ID used to access the device, takes values 1-4094;
Protocol – select protocol for connection of the device via Ethernet interface to service provider network:
DHCP – operation mode, when IP address, subnet mask, DNS server address, defualt gateway and
other parameters required for operation are obtained from DHCP server automatically;