WOP-2ac quick manual
18
According to this table, spectral analysis of the whole network might be carried out and there is an opportunity to
estimate interference influence to each access point. It will help you to estimate better location of access points
among coverage area and to define locations with exceeding level of noise. The top string of the table contains
data on each radio interface of access points included in a particular cluster. The left column contains data on
wireless networks which are defined by the devices in the cluster. A value of signal level of each access point is
displayed in the top-right cell of the table.
The table is formed in the way that wireless networks organized by a cluster are displayed first, the third-party
networks follow after them.
The table might be displayed in 3 modes:
•
In cluster
– when checked, the table consists data only on wireless networks organized by the cluster;
•
Not in cluster
– when checked, the table consists data only on third-party wireless networks;
•
Both
– when checked, the table consists data on all wireless networks.
To view current list of the access points in the cluster and their parameters, switch to
«Radio Resource
Management»
tab. The table
«Current Channel Assignments»
consists the following parameters:
•
IP Address
– IP address of the access point in the cluster;
•
Radio
– MAC address of a radio interface of the access point in the cluster;
•
Band
– standards supported by the radio interface of the access point in the cluster at the moment;
•
Channel
– number of a channel on which the access point operate;
•
Status
– operation state of the access point's radio interface in the cluster;
•
Locked
– block channel change. When checked, the radio interface will always use the same channel even
when another channel is selected as optimal for all the access points in the cluster.
Click
«Refresh»
to update the table
«Current Channel Assignments»
.