ELTEX KNH35, Руководство по эксплуатации

Страница: 14 / 48

14
BA-en-3031-2004_KNH35
3.5 Connecting the high voltage cable to the high voltage generator
and to the distribution box
Warning!
Electric shock hazard!
Work may be carried out only if:
• the supply voltage to the generator has been disconnected,
• the machine is at a standstill because the bars pick up charges if the
material web is running.
Method:
Connect the bars via the prefabricated high voltage cable. Push the high
voltage cables up to the stop into the socket connection. Finally, secure
the adapter inside the socket with the clip provided (see figure).
Cables without adapters have a color-coded marking on the flexible
tubing. This marking must lie flush with the outside edge of the coupling.
Note:
The clip must be fully inserted.
Caution!
The high voltage cable must be pushed up to the stop (90 mm) into the
cable inlet! The connecting area of the high voltage cable must be kept
clean!
Fig. 5:
Connecting the
high voltage cable
Z0
01
78y
Fig. 6:
Inserting the clip
correct
incorrect
Z00
0
18
y