Rectifier
PSR312
User Manual
Page 7 (20)
©2011. ELTEK DEUTSCHLAND GmbH.
Eltek_UM_PSR312_21TE_ E_R6.0
3.1 Available Options and Assembly Equipment:
Designation
Article Codes
DC Power Rack DCR PSR327-3.6 LV (assembly set 19’’ sub rack 3U
incl. backplane for three PSR312/24 V rectifiers and one
UPC3-24 V DC controller), DCC-CB1 connection board included.
102-327-318.LV01
DC Power Rack DCR PSR327-4.8 LV (assembly set 19’’ sub rack 3U
incl. backplane for four PSR312/24 V rectifiers).
102-327-408.LV01
Cover plate (with handle) to cover empty PSR slots,
1/4 x 19’’, 3U; RAL 7035
881-MEC-BPL.03.21.B
Monitoring, control and signalling unit (DC controller) UPC-24 V
301-003-498.02
DCC-CB1; connection board (with MSTB screw terminals) necessary
to connect all measuring, control and signalling wires over the
backplane of the sub rack to the control unit UPC3 (spare part)
302-DCC-CB1.00
CAN dongle, incl. software; necessary to change the internal default
values of the rectifier (e.g. for NiCd application).
880-CAN-DNG.00
Figure 1) - DC Power Rack DCR PSR327-3.6 LV fully
equipped with three PSR312 rectifiers and one
UPC3 DC controller
Figure 2) - DC Power Rack DCR PSR327-4.8 LV fully
equipped with four PSR312 rectifiers
