Eltek Valere Flatpack2, Быстрый старт

Страница: 1 / 36

Flatpack2 PS System, SP2
356825.103
Quick Start Guide
Installation, Operation, Commissioning and Maintenance
Smartpack2 -based, DC Power Supply System
Integrated 4U Distribution, Cabinetized and Outdoor Applications
Introduction
o
The Smartpack2- based Product Range (2 )
o
Brief Description, Smartpack2 -based System (2 )
Commissioning
o
Pre-start check (8 )
o
Commissioning steps, Startup (8-9)
Operation
o
Front keys and display, Controller Access via PC (10 )
o
Software Menus – Smartpack2 Master Controller ( 11)
Appendix
Communication
o
CAN Bus Termination and Addressing (12 )
AC Mains
o
External AC Fuses, Recommended Rating ( 13)
o
Identifying Power Shelves, 4AC, 2AC or 4AC-3kW (14 )
o
I. Individual AC Mains Terminals ~ NOT Reconfigurable (14 )
o
II. AC Mains Terminal Block ~ Reconfigurable (15 )
o
III. AC Terminal Block with SPDs ~ NOT Reconfigurable (16 )
o
About AC, DC Earthing Systems ( 17)
o
Mains Phases vs. Rectifier ID – Phase Balancing & Monitoring (18-19)
Battery Monitoring
o
Battery Monitor’s 48V Symmetry Connections (20-21)
Internal Connections
o
Standard Alarm Relays & Digital Inputs – Connections ( 22)
o
LVD Latching Contactors – Connections ( 22)
o
Replacing Smartpack2 Basic Controller, inside- or top cover-mounted…(23)
CAN Bus Nodes
o
Battery Monitor CAN Node (24 )
o
Load Monitor CAN Node ( 25)
o
I/O Monitor and I/O Monitor2 CAN Nodes (26 )
Check Lists
pullout forms
o
Installation Check List
o
Circuit Distribution List
o
Commissioning Procedure
o
Maintenance Procedure
Installation
o
Installing Rectifiers & Opening Smartpack2 Master ( 3)
o
Installation steps; mechanical, electrical (4-5)
o
Location of Components, GA Drawing (6 )
o
Connections, Factory Settings, etc. ( 7)