4
cybox GW-P
installation manual
3.1.3
Antenna Connectors
The up to 17 QLS antenna connectors are located at bottom part of the front panel of the access point.
The connectors labeled from A1 to A17. Their functionalities depend on the CyBox GW-P model (see 3.4.1
Correspondence Front plate / Software).
While connecting an antenna to the QLS connector, make sure that you hear a ‘click’ sound confirming
proper mounting.
To remove an antenna, it has to be gently pulled from the basis of the connector with one hand, while
the other hand is holding the antenna. Alternately, a screwdriver can be used as a lever arm at the basis
of the antenna to make the removal easier, as illustrated below:
Step one:
Place the screwdriver between the connector and
the access point
Step two:
Rotate and/or push the screwdriver while pulling
on the antenna