3
CYBOX GW 2-P
e
s
IN
ST
AL
LA
TI
O
N
M
AN
U
AL
3
HARDWARE
3.1
DEVICE CONNECTORS
3.1.1
POWER SUPPLY CONNECTOR
The CyBox GW 2-P can be powered by a DC power source connected to the internal power supply and I/O
connector, shown in Table 1 . The nominal input voltage can vary between 24 V and 110 VDC. The electrical
power can be supplied to the device using the A-coded M12 power connector, labeled PWR.
Table 1 shows the pin assignment of the power supply connector.
PIN
SIGNAL NAME
DESCRIPTION
1
+VIN
Supply voltage, positive terminal
2
+VIN
Supply voltage, positive terminal
3
-VIN
Supply voltage, negative terminal
4
-VIN
Supply voltage, negative terminal
Table 1
Pin Assignment of Power Supply Connector (PWR)
3.1.2
M12 ETHERNET INTERFACES
The two LAN ports of the CyBox GW 2-P are utilizing M12 X-coded connectors with the pin assignment as
shown in Table 2. Mating connectors are available from several manufacturers.
PIN
SIGNAL NAME
DESCRIPTION
1
2
3
4
5
6
7
8
1
D1+
First data line plus
2
D1-
First data line minus
3
D2+
Second data line plus
4
D2-
Second data line minus
5
D4+
Fourth data line plus
6
D4-
Fourth data line minus
7
D3-
Third data line minus
8
D3+
Third data line plus
Table 2
Pin Assignment of M12 Ethernet Connectors (LAN 1/2)
