Elta 6699CW, Руководство пользователя

Страница: 18 / 103

18.
. Remove carefully the CD upwards without touching the surface.
4. Close the CD-door (5) manually.
5. Store the removed CD in its cover.
CD / MP3 DisC PLayBaCK
1. Insert a CD (see section “INSERTING OF A DISC“).
2. During the reading of a CD “- - -“ flashes on the display and afterwards the total number of tracks
will be shown.
Audio CD : total number of tracks.
MP CD : total number of tracks and “MP“ is shown.
3. The playback of the first track starts automatically.
4. Adjust the volume with the VOLUME control ().
5. Press PLAY / PAUSE (19) to pause the playback. The symbol „►“ flashes on the display. To resume ►“ flashes on the display. To resume “ flashes on the display. To resume
the playback from the same position press PLAY / PAUSE (19) again.
6. Press STOP (1) to cancel the playback.
7. Set the FUNCTION selector () to the OFF position to turn off the CD player. The POWER LED (18)
turns off.
sELECtiOn OF a DiFFEREnt tRaCK (sKiP in the stop mode and during playback)
1. Press SKIP + (16) or SKIP - (17) until the desired track number is displayed.
. Shortly press SKIP - (17) to return to the beginning of the current track.
. Press SKIP - (17) again to skip one track back at a time.
4. Press SKIP + (16) to skip to the next track at a time.
sELECtiOn OF a DiFFEREnt aLBUM (only MP3, in the stop mode and during playback)
1. Press ALBUM (12) once. On the display “ALBUM“ and the current album number flashes.
. Repeatedly press ALBUM (1) until the display shows the desired album number.
3. Press PLAY / PAUSE (19) to start the playback of the first track in the selected album.
sEaRCH FOR a CERtain POsitiOn DURing PLayBaCK
Press and hold SKIP + (16) or SKIP - (17) to search for the desired position within the track. Normal
playback continues when the button is released. In search mode the volume is reduced.
PROgRaM PLayBaCK
Up to 99 tracks can be programmed in a specified playback sequence.
1. Before programming press STOP (1).
2. Invoke the program mode by pressing PROGAM (11). “P01“ and “PROG“ are flashing on the
display.
. Select the desired track number with SKIP + (16) or SKIP - (17). (With the ALBUM button (1) the
album / folder can be selected).
4. Press PROGAM (11) again to confirm.
5. Repeat steps and 4 to program further tracks.
6. After all desired tracks are programmed, press PLAY / PAUSE (19) to start the programmed
sequence. On the display “PROG“ is shown.
7. Press STOP (13) once to finish the program playback and add further tracks beginning from the
next free program number (see 5.).
8. Cancel the program playback and delete the program memory by pressing STOP (1) twice.
Notes: After entering more than 99 programmed tracks the display shows “FUL“.
Turning off the player deletes the program memory.