background image

HIT

 Inst Issue 14: 18.10.17

1.

 WARNING 

This fan is fitted with a non self-resetting thermal cut-out which switches    

 

the fan off in the event of a fault condition. To reset, turn the power off for one   

 

 

minute, then back on. Only a suitably qualified and competent person may carry out    

 

maintenance after the electrical supply has been isolated.

 CAUTION 

In order to avoid a hazard due to inadvertent resetting of the thermal cut-   

 

out, this appliance must not be supplied through an external switching device, such as  

 

a timer, or connected to a circuit that is regularly switched on and off by the utility. 

 WARNING 

The appliance can only be used indoors. 

2. General

2.1 

It is important these Installation and Maintenance Instructions are fully adhered to.

2.2 

Full details of the unit supplied are shown on the product nameplate. If in doubt about any  

 

detail contact Hydor or its agents   for clarification.

2.3 

All electrical installation must be carried out by suitably qualified and competent    

 

 

personnel in accordance with all current statutory requirements.

2.4 

These instructions cover only the Hydor product and do not include  the supply or  

 

 

installation of any safety equipment that may be required e.g. adequate guarding or  

 

 

protection from rotating parts and proper electrical isolation.

2.5

 

Any declarations made by Hydor about product installation and safety, are dependent on  

 

the fan equipment being used within installations which themselves meet the  

 

 

 

requirements of the  relevant Standards and Directives of your region.

2.6 

The fan is designed for use in up to 95% relative humidity. The fan is not suitable for  

 

 

corrosive or explosive atmospheres.

2.7    The installer should provide easy access to the fan to facilitate future maintenance.
2.8    The installer should ensure the fan is adequately supported.
2.9a 

The below statement is only applicable to the European market. 

 

  This appliance can be used by children aged from 8 years and above and persons with  

 

 

  reduced physical, sensory or mental capabilities or lack of experience and knowledge  

 

  if they have been given supervision or instruction concerning use of the appliance in a safe  

 

  way and understand the hazards involved. Children shall not play with the appliance.  

 

  Cleaning and user maintenance shall not be made by children without supervision.

2.9b 

The below statement is only applicable to the non-European market. 

 

  This appliance is not intended for use by persons (including children) with reduced    

 

 

  physical, sensory or mental capabilities, or lack of experience and knowledge, unless they   

 

  have been given supervision or instruction concerning use of the appliance by a person    

 

  responsible for their safety. Children should be supervised to ensure that they do not play    

 

  with the appliance.

HIT 

Centrifugal In-Line Fan

Содержание Hydor HIT Series









Отзывы: