9
Elektroniksystem i Umeå AB Industrivägen 12, 90130 Umeå, Sweden
E-mail:
Web:
Powered analog input 0
–
10V
Input signal between input and ground. +3V present at B+ pin.
Select “Analog input” in
the application
“Sensor Settings”. Select “Eternal startup time”
and configure ON-time for sensor. External startup time is how long the sensor will be
powered before sampling value. ELT input is internally pulled down and the input
impedance is 7.4 k
Ω
Switch Input (Pull up)
Input signal between input and ground.
Select “
Switch (Normally open)
”
in the
application “Sensor Settings”. ELT input is
internally pulled up by ~50 k
Ω
*.
