Elsys AMPLIMAX EPRL16, Руководство пользователя

Страница: 10 / 16

With the computer settings done correctly, open the browser of your choice and enter the IP address of the AMPLIMAX
(the factory default is 192.168.10.254 ). If all connections are correct, the product setting page can be accessed.
* If the automatic option does not work, make sure that the equipment is receiving some signal from the carrier.
AMPLIMAX HOME PAGE
Page with the basic settings of the Ethernet port and the 4G / 3G / 2G connection
FEATURED FEATURES:
BLIND SEARCH:
In the menu Tools is it is possible to do a BLIND SEARCH of carriers,
even with a Sim Card installed in the product. Find out which carrier is
performing best in your region.
BALANCE CONSULTATION:
Still on the menu Tools it is possible to receive and send SMS. This tool is
useful to check messages sent by the carrier and to make data inquiries.
Another tool that allows you to make balance inquiries is the "USSD",
which is also in the menu Tools.
DATA COLLECTION
In the menu About the Device it is possible to enable or disable data
collection, as well as to know its details.
The maximum cable length
must be 1.5m.
EXTERNAL ANTENNA
Although this product is integrated with a
high-performance Heptaband antenna, it
allows the installation of an external
antenna in a practical way in a TNC
connector, but there is an important detail
about the cable length.
To avoid signal loss, the external antenna
installation cable must not exceed 5ft.
Cellular connection
Antenna Type
Connection Type
Automatic Connection
Configured Ethernet
IP Address
Network Mask
Tools
General
Settings
Settings System
Status
SIM: Carrier:
Vivo
Signal Level:
97%
4G
Connection: UPDATE
Apply Changes
Internal
Automatic
192.168.10.254
255.255.255.0
To change the network mask of the Ethernet port
Call settings
Economy Mode
(Maximum speed 2MBPs)
Good
About
the device
WEB SETTING PAGE
System Status - On this page the user can see
all the equipment information.
To save press the “Apply Changes” key
To change the
IP address of
the Ethernet
port
To switch integrated
or external antenna.
To choose the mode
Turn on: Validate carriers
automatically.
Turn off: Manually select the carrier's
username, password and APN