GB-3
D
GB
F
NL
I
SK
BK-G..E and BK-G..B
The following data is not specified on the type label/
index plate, but can be called up in the menu:
– specified centre temperature t
sp
(for meters with
temperature conversion only),
– EN 1359 registration number (if available),
– firmware version.
Diaphragm gas meters with integrated valve
DE-07-MI002-PTB001
002545632734
class 1,5
NG-47001BM0443 DIN EN 1359:2007
BK-G..
VALVE Vx
M12 0102
m
3
,
-
Valve variants:
Vs = Smart Valve
Vp = bi-stable valve (prepayment meter)
Ve = bi-stable valve for electronic index
▷
Up to 12.2011, all valve versions were simply
marked with the word VALVE on the type label/
index plate.
ATEX identification
BK-G..M, BK-G..C, BK-G..MT, BK-G..CT
BK
Elster GmbH, Strotheweg 1
D-49504 Lotte, Germany
TÜV 11 ATEX 090370 X
II -/2 G c IIB TX
Use as follows:
Category: internal: none, external: Category 2 (Zone 1).
Type of atmosphere: gases, hazes and vapours.
Diaphragm gas meters BK-G..A, BK-G..AT
BK
Elster GmbH, Strotheweg 1
D-49504 Lotte, Germany
Ui=5,5V Ii=30mA Pi=33mW Ci=140
µ
F Li=0
µ
F
II -/2 G IIB T4
Use as follows:
Category: internal: none, external: Category 2 (Zone 1).
Type of atmosphere: gases, hazes and vapours.
Diaphragm gas meters BK-G..E, BK-G..ET,
BK-G..ETB
BK
Elster GmbH, Strotheweg 1
D-49504 Lotte, Germany
TÜV 11 ATEX 093627 X
II -/3 G IIA T1
Use as follows:
Category: internal: none, external: Category 3 (Zone 2).
Type of atmosphere: gases, hazes and vapours.
Diaphragm gas meters BK-G..B
BK
Elster GmbH, Strotheweg 1
D-49504 Lotte, Germany
TÜV 12 ATEX 098560 X
II -/2 G IIA T4
Use as follows:
Category: internal: none, external: Category 2 (Zone 1).
Type of atmosphere: gases, hazes and vapours.
Installation
WARNING
Please observe the following to ensure that neither
persons nor the gas meter are damaged during
installation and operation:
– Note the max. allowable operating pres-
sure p
max
and measuring range Q
max
, see
page 2 (Type label/Index plate).
– Note the permitted ambient temperature t
m
and
gas temperature t
g
, see page 2 (Type label/
Index plate) or page 7 (Technical data).
– The gas meter is suitable for mechanical ambient
conditions of Class M1 of Directive 2004/22/EC.
For gas meter versions BK..A, BK..E and BK..B,
Class E2 for electromagnetic ambient conditions
also applies.
– When installing the diaphragm gas meter BK
with integrated valve, make sure that no dirt
particles get into the meter and thus into the
valve.
– The yellow sealing sleeve protects the pres-
sure test point on the gas meter. It may only be
opened for connecting a pressure measuring
line.
– Use seals made from tested materials. Elastomer
seals or asbestos-free flat seals from Elster are
recommended.
– For meters resistant to high temperatures, only
use seals tested to be resistant to high tempera-
tures.
– Only use the seals once.
– For installation and operation, note the applica-
ble national regulations and the directives of the
gas supply company. For Germany, the valid
DVGW Code of Practice G600 (DVGW-TRGI)
applies.
– Work on meters and the installation of meters
which are marked with
and are installed in
potentially explosive atmospheres may only be
carried out by persons with appropriate qualifi-
cations.
