Elson EPS PEX Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 52

Elson EPS PEX Скачать руководство пользователя страница 17

Frequently Asked Questions

Can EPS pipe be installed under a slab?

YES

–

with the following requirements

• Installation in accordance with AS/NZS 3500.
• Installed within Elson corrugated sleeve conduit.
• Must be sleeved when penetrating through a slab.
• Installed in a single continuous length without fittings.

Can EPS pipe be used for underground cold water service
applications?

YES

– when installed in accordance with AS/NZS 3500

requirements.

Can EPS pipe and fittings be used to connect solar panels
to the storage tank?

NO

– Australian Standards do NOT allow PE-X Pipe to be used

on the flow or return lines between solar panels and solar
storage vessels.

Is there anything I need to do before using a Manual Crimp
Tool?

YES

- follow all of these important steps below:

• Ensure that the tool is compatible with EPS Pex Pipe and Elson

EPS Crimp Pex Fittings.

• Ensure the tool is good working order.
• Ensure that the jaws align and have no gap when closed.
• Ensure that the jaws are clean, free of defects and debris.
• Refer to Jointing Procedure in this manual for correct method.

Is there anything I need to do before using the approved
battery Crimp Tool?

YES

– follow all of these important steps below:

• Ensure that the tool is compatible with EPS Pex Pipe and Elson

EPS Crimp pex fittings.

• Read and recognise the instructions contained in the manual.
• Ensure the correct jaws match the tool, the pipe and the fittings.
• Inspect the tool to ensure if functions properly.
• Inspect the jaws to ensure they’re clean, dry, and free of dirt.

* Elson Lead Free copper alloy products are 99.9% Lead Free and contain less than 0.1% Lead by weight.

17

EPS

LEAD FREE*

CRIMP

W

ATER -

FA

Q

99.9% Lead Free

< 0.1% Pb

EPS PEX

«
...
15
16
17
18
19
...
»

Содержание EPS PEX





















































Отзывы:

Нет отзывов