Conversion WS1000 without Touch
WS1000
Color
Assembly
information
WS1000 Color
Please also observe the assembly instructions and the WS1000 Color manual!
Information on assembly
Page 2 of 2
Status: 06/05/2015
Assembling the new controller with adapter plate
6)
Connect the adapter plate earth with the WS1000 Color circuit
board. The protective conductor can be connected to the PE
terminal for the mains connection or to a vacant drive group of
the WS1000. Alternatively, a protective conductor terminal on
the building can be used for earthing.
7)
Pull the display cable through the recess in the adapter plate
and screw the plate on to the old controller's concealed box.
Use the screws from the old WS1000.
8)
Also pull the display cable through the recess in the WS100
Color wall mounting plate and screw the lower part onto the
adapter plate (3 M4 countersunk Allen screws are provided with
the adapter plate).
9) Connect the display and screw on the upper part of the WS1000 Color housing (frame and display).
