3
Installation and commissioning
GPS-DCF Converter UTC±
• Date of issue: 17.05.2011 • Errors excepted. Subject to technical changes.
If an operation without risk may supposedly not be guaranteed, the device must be put
out of operation and be secured against accidental operation.
The device must only be operated as stationary system, i.e. only in a fitted state and
after completion of all installation and start-up works, and only in the environment in-
tended for this purpose.
Elsner Elektronik does not assume any liability for changes in standards after publica-
tion of this instruction manual.
2.2. Layout of the circuit board / Connection
Assignment DIP switches:
1
+/- (Setting of time offset, switch OFF: + | switch ON:-)
2
0,5 hours offset
3
1 hours offset
4
2 hours offset
5
4 hours offset
6
8 hours offset
The common time offset values can be reached by adding the values of the switches.
7
MEZ / CET
If switch 7 is set to ON, the Central European Time is ouput, including automatic sum-
mer/winter time switch-over.
1
Fig. 1
1
LED indicator
“Transmit DCF”
2 LED
indicator
“GPS Reception”
3 LED
indicator
“Voltage Supply”
4
DIP switches
45 DCF Output
1: +24 V
2: -
3: out
2
3
5
4
