Elsner 70156, Установка и настройка

Страница: 46 / 52

44 Parameter setting
Weather Station Suntracer KNX sl basic • Version: 26.08.2021 • Technical changes and errors excepted.
If necessary, activate the computer block and set what a 1 or 0 at the block entry means
and what happens in the event of a block.
6.13. Logic
The device has 16 logic inputs, eight AND and eight OR logic gates.
Activate the logic inputs and assign object values up to first call.
Activate the required logic outputs.
AND logic
OR logic
6.13.1. AND logic 1-8 and OR logic outputs 1-8
The same setting options are available for AND and OR logic.
Monitoring period 5 s • ... • 2 h; 1 min
Value of the object "monitoring status"
if period is exceeded 0 • 1
Use block No • Yes
Analysis of the blocking object • At value 1: block | At value 0: release
• At value 0: block | At value 1: release
Value before first call 0 • 1
Output pattern
On block • do not send anything
• send value
On release • as send pattern [see above]
• send current value immediately
Use logic inputs Yes • No
Object value prior to first call for:
- Logic input 1 0 • 1
- Logic input ... 0 • 1
- Logic input 16 0 • 1
AND logic 1 not active • active
AND logic ... not active • active
AND logic 8 not active • active
OR logic 1 not active • active
OR logic ... not active • active
OR logic 8 not active • active