background image

Weather Station P03/3-RS485 • Version: 11.10.2011 • Subject to technical alterations. Errors excepted. 

Description 

The P03/3-RS485 Weather Station measures temperature, wind speed and brightness 

(eastern, sothern and western sun). It recognizes precipitation and receives the DCF77 

radio signal for date and time.  

 

The weather station sends the currently recorded weather data, date and time once 

every second. This data flow can be received and analyzed by an end device such as 

SPS, PC or MC. If the DCF signal cannot be received, the data is output approx. every 

1.35 seconds. 

 

The P03/3-RS485 has four connections. Data output is at terminals A and B. Terminals 1 

and 2 are for the power supply (24 V DC). The connections are 

not resistant to pole 

reversal

. Connecting them incorrectly 

will destroy

 the interface components

 

Functions:  

 

Brightness measurement

 with three separate sensors for east, south and west. 

Recognition of twilight/dawn with special filters  

 

Wind speed measurement

 by means of a nonwearing electronic sensor. No 

damage from storm or hail as with mechanical anemometers 

 

Temperature measurement  

 

Heated

 precipitation sensor

 (1.2 watts): No false reports as a result of fog or 

dew. Dries quickly after precipitation has stopped 

 

Integrated 

DCF77 radio clock receiver

  

 

Technical data 

Housing:  

Plastic material 

Colour:  

White / translucent 

Mounting:  

On-wall 

Protection category:  

IP 44 

Dimensions:  

approx. 96 x 77 x 118 (W x H x D, mm) 

Weight:  

approx. 160 g 

Ambient temperature:  

Operation -30…+50°C, Storage -30…+70°C 

Operating voltage:  

24 V DC 

Current:  

max. 125 mA, residual ripple 10% 

If switching power supply units are applied, the quality of the radio clock reception may 

be influenced. 

Data output:  

RS485 

Heating rain sensor:  

approx. 1.2 W

Содержание P03/3-RS485













Отзывы: